Description

DINSTAR UC100-1S1O VOIP PBX FOR SME (32 User)

UC100 is an all-in-one Universal Gateway with built-in IP PBX features, designed for SOHO and small businesses that can increase communication efficiency, reduce telephony costs and provide easy management features. It integrates LTE/GSM, FXO, FXS interfaces and VoIP features, as well as data features like Wi-Fi hotspot, VPN. With 32 SIP users and 8 concurrent calls, UC100 is a perfect choice for small businesses.

DINSTAR

• Physical Interfaces

  • FXS Port: 1
  • FXO Port: 1
  • SIM Slot: 1
  • Network Port：1 WAN Port & 3 LAN Ports（10 / 100 Base-T RJ45）
  • WiFi：2.4Ghz 802.11n
• Voice Capabilities
  • VoIP Protocols: SIP over UDP / TCP / TLS, SDP, RTP / SRTP
  • Codecs: G.711a / μ law, G.723.1, G.729A / B
  • Silence Suppression
  • Comfort Noise Generator
  • Voice Activity Detection
  • Echo Cancellation: G.168 with up to 128ms
  • Dynamic Jitter Buffer
  • Adjustable Gain Control
  • Automatic Gain Control
  • Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
  • FAX: T.38 and Pass-through
  • NAT Traversal: STUN / UPnP
  • DTMF: RFC2833 / Signal / Inbound
• FXS
  • FXS Connector: RJ11
  • Caller ID: Bell core Type 1&2, ETSI, BT, NTT, and DTMF
  • Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone
  • Polarity Reversal
  • Hook Flash
• FXO
  • FXO Connector: RJ11
  • Caller ID: FSK and DTMF
  • Polarity Reversal
  • Answer Delay
  • Busy Tone Detection
  • No Current Detection
• Software
  • Ring Group
  • Routing Groups
  • Caller/Called Number Manipulation
  • Routing Based on Time Period
  • Routing Based on Caller/Called Number Prefix
  • Routing Based on Source Trunks
  • Dial Rules
  • Failover Routing
  • FXO Impedance Auto Match
  • IVR Customization
  • Auto Attendant Function
  • CDRs

• Supplementary Services

  • Call Forwarding （ Unconditional / Busy / No Reply ）
  • Call Waiting and Call Holding
  • Call Transfer (Blind & Attended)
  • Intra-group Pick-up
  • Hotline
  • No Disturbing
  • Three-way Conversation
• Environmental
  • Power Supply: 12V DC, 1A
  • Power Consumption: 10W
  • Operating Temperature: 0 Degrees to 45 Degrees
  • Storage Temperature: -20 Degrees to 80 Degrees
  • Humidity: 10 to 90 Percent (Non-Condensing)
  • Dimensions：143 x 86 x 25mm
  • Weight：0.4kg
• Maintenance
  • Web GUI for Configuration
  • Telnet Management
  • Configuration Restore & Backup
  • Multiple Languages
  • Firmware Upgrade: support HTTP / HTTPS / TFTP / FTP
  • Auto Provision
  • CDR Query and Export
  • Syslog Query and Export
  • Network Tools: Ping, Traceroute, and Nslookup
  • Network Capture

  • DINSTAR