Wireless Remote Control HK-980

Description

Wireless Remote Control HK-980

Technical Data: Input Power: DC10V-14V Standby Current:97dbm Transmitting distance:>100m ( open space) Decoding mode: MCU software decoding Remote storage:50pcs Support remote type: Learning code, Fixed code(Rolling code can be design) Working mode: Momentary, Toggle, Latching Time delay (5s,10s,15s ) Wiring type: fixed terminal Output Terminal: NO, NC, COM Dimension of PCB:35*30*18mm (L, W, H) Wiring diagram 1: +V: 12V + input; – V: 12V – input; NO: Output, normal open; COM: Output, common; NC: Output, normal close; About Working mode: Momentary: Push the remote button, the relay connects, release the remote button, the relay disconnects. Toggle: Push once the remote button, the relay connects, push twice the remote button, the relay disconnects. Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. Tiem delay mode: Push the remote control button, the relay connects, from when releasing the remote button, after 5s or 10s or 15s, the relay disconnect automatically. Clearing the code: Push the learning button on the receivers 8 times, the codes will be cleaned. After clearing the code, all the remote control cannot work anymore. Learning the code :(momentary) Push the learning key on the receiver once time, it comes into momentary setting mode. Wait for a moment, the LED will be off, it comes into a learning state. Push the remote button, the LED indicator on the receiver board will flash then come off. After 3 seconds, the LED indicator will be on again, learning successfully. Learning the code : ( Toggle ) Push the learning key on the receiver twice the time, it comes into toggle setting mode Wait for a moment, the LED will be off, it comes into a learning state. Push the remote button, the LED indicator on the receiver board will flash then come off. After 3 seconds, the LED indicator will be on again, learning successfully. Learning the code 🙁 Latching ) Note: When you choose for latching mode, to learn more remote control, you need to learn two different buttons, the first time learnt is for “ON”, the second time learnt for “OFF”. For example button A = ON, button B = OFF Push the learning key on the receiver triple time, it comes into latching mode. Wait for a moment, the LED indicator on the receiver board will flash then come off. Push the remote button A . LED flash for 5 times. Push the remote button B. Led flash for 5 times. After 3 seconds, the LED indicator will be on again, learning successfully. A = ON , B = OFF . Learning the code 🙁 Time delay mode ) Push the learning key on the receiver fourth time, the time delay for 5 seconds. Push the learning key on the receiver the fifth time, the time delay for 10 seconds. Push the learning key on the receiver sixth time, the time delay for 15 seconds. The LED indicator will be off. Push the remote button, LED flashes and off. After 3 seconds, the LED indicator will be on again, learning successfully. NOTE: The system can store 50 pcs of remotes, if the remote get more than 50pcs, the initial remote control will be lost. PACKAGE 1 SWITCH 1 RECEIVER Wireless Remote Control HK-980

Message | Contact US