-
CFP Conventional Panel 2 Zone CFP702-4/CON
(0)৳ 25,000.00Add to cartLPCB certified to EN54-2/4, C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.
Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry.
A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.
Optional repeaters, relay expansion boards and EN54-13 system compliance devices are also available.
-
Conventional Fire Alarm Control Panel 1 Zone
(0)৳ 13,500.00Add to cartInstaller-friendly design.
Robust metal enclosure with heavy-duty base connections.
One conventional Zone circuit
Two conventional Sounder circuits.
Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
Non-latching class change sounder output, latching fire & non-latching fault outputs (via optional expansion loom).
Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
Multi-lingual variants (subject to quantities).
Space for 2 x 12V 2.3Ah VRLA batteries.
Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations). -
Conventional Fire Alarm Control Panel 2 Zone
(0)৳ 28,000.00Add to cart2 Zone FP fire panel Non Expandable complete with 2 x 1.2A/H Sealed Lead Acid batteries).
-
Conventional Fire Alarm Resettable Call Points
(0)৳ 2,000.00Add to cartModel : CP500CPR/BH/R
Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP1A525IMC indoor call point range.
-
Conventional Heat Detector
(0)৳ 2,200.00Add to cartCR (84 to 100°C) Heat Detector with flashing LED , 55000-131IMC
(EN54 with Flashing LED),The detector has a moulded
self-extinguishing white
polycarbonate case. Nickel
plated stainless steel wiper
contacts connect the
detector to the base. -
Conventional Heat Detector
(0)৳ 2,200.00Add to cartsmoke detector price in bd
Series 65E Optical Smoke Detector With Flashing Led, 55000-316IMC
. The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the casing of the sensor. The external sensor molding is identical to that of the ionization sensor and has a pointer LED which is clear in the inactive country but produces red light in alarm. -
Conventional Smoke Detector
(0)৳ 2,200.00Add to cartsmoke detector price in bd
Series 65E Optical Smoke Detector With Flashing Led, 55000-316IMC
The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state but produces a red light in alarm. -
Conventional Sounder CP550DB
(0)৳ 2,500.00Add to cartConventional Sounder 32 Tone CP550DB
24VDC Red FirePlus DB Weatherproof IP65 32 Tone Conventional fire sounder with Red deep base (LPCB APPROVED) -
Conventional Sounder With Flashing Light
(0)৳ 3,500.00Add to cartConventional Combined Sounder Beacon Red with Red Deep Base CP750CDB
24VDC Red FirePlus CDB Weatherproof IP65 conventional combined fire sounder / beacon with Red deep base (INTERTEK APPROVED)
-
Conventional Sounder With Flashing Light
(0)৳ 3,500.00Add to cartConventional Combined Sounder Beacon Red with Red Deep Base CP750CDB
24VDC Red FirePlus CDB Weatherproof IP65 conventional combined fire sounder/beacon with Red deep base (INTERTEK APPROVED)
-
Ei100B Smoke Alarm Fire + Gas Detection
(0)৳ 1,300.00Add to cartHigh sensitivity – responds to all standard fires
double Ionization apartment – quick response to fast flaming fires
Battery-powered – 9V ( supplied)
Needs no wiring
Missing battery indicator
Low battery alerting
confected insensible
Test button
Kitemarked to BS EN 146042005
manufactured in Ireland
